iOS Niatikl 3 scale in pieces always major?

Tell us what doesn't work as it should
oldlibmike
Platinum
Posts: 104
Joined: Sun Jan 23, 2011 3:28 pm
antispam_a: cole
antispam_b: 9

iOS Niatikl 3 scale in pieces always major?

Postby oldlibmike » Sun Nov 22, 2015 7:21 pm

Hi all,
Scale changes on Noatikl 3 iOS seem to have no effect.
Working for anyone else?

Mike

Umcorps
Platinum
Posts: 415
Joined: Thu Aug 23, 2007 7:41 pm
antispam_a: cole
antispam_b: 9
Location: Directly above the centre of the earth
Contact:

Re: iOS Niatikl 3 scale in pieces always major?

Postby Umcorps » Mon Nov 23, 2015 6:53 am

Just tested it with the generic, scale rules template. Works as expected on my phone here. Not sure what might be causing your issue but I don't think it's a problem with the engine.

impete
Site Admin
Posts: 2297
Joined: Fri Jun 22, 2007 1:30 pm
antispam_b: 2
Location: intermorphic Towers

Re: iOS Niatikl 3 scale in pieces always major?

Postby impete » Mon Nov 23, 2015 8:30 am

Thanks Mark!

I know it is stating the obvious, but it possible that you've (say) set-up your voices to use a custom Scale Rule, but are changing the values for a different Scale Rule - and, therefore, aren't hearing any changes..?!

Best wishes,

Pete

oldlibmike
Platinum
Posts: 104
Joined: Sun Jan 23, 2011 3:28 pm
antispam_a: cole
antispam_b: 9

Re: iOS Niatikl 3 scale in pieces always major?

Postby oldlibmike » Tue Nov 24, 2015 1:32 am

Hi Pete,
I think the scenario is that I created 2 voices with default scale and then created a custom blues scale for the piece after the 2 voices. I would expect 'default' to use the piece scale but it stayed major.

I can work around it but not what I'd expect to happen.

Thanks for the helpful responses!

Mike

imtim
Site Admin
Posts: 970
Joined: Thu Jul 24, 2003 9:53 pm
antispam_b: 2
Contact:

Re: iOS Niatikl 3 scale in pieces always major?

Postby imtim » Tue Nov 24, 2015 7:35 am

oldlibmike wrote:I think the scenario is that I created 2 voices with default scale and then created a custom blues scale for the piece after the 2 voices. I would expect 'default' to use the piece scale but it stayed major.


Hi Mike.

Each voice can be set to use scale rule "?", which in effect means it should use the piece level scale rule. It sounds like you have the voice rules set to "Default" which means they will use that instead of your "Blues" rule, that I presume you have select as the piece rule. Either set both the voice scale rules to "Blues" rule or to "?" and it should work as you want.

hth!

tim


Return to “Bug Reports”

Who is online

Users browsing this forum: No registered users and 1 guest