Reaper 64 + Noatikl 64 stand alone - walk through please :)

Generative Music Composer
Zhang
Bronze
Posts: 9
Joined: Sun Sep 21, 2014 12:30 pm
antispam_a: cole
antispam_b: 9

Reaper 64 + Noatikl 64 stand alone - walk through please :)

Postby Zhang » Thu Oct 16, 2014 9:22 pm

I'm now on Reaper 64 and have Noatikl 64 installed as an external program. I also have MidiOx installed.

Is there a walk through to get this working?

Thanks again

Umcorps
Platinum
Posts: 415
Joined: Thu Aug 23, 2007 7:41 pm
antispam_a: cole
antispam_b: 9
Location: Directly above the centre of the earth
Contact:

Re: Reaper 64 + Noatikl 64 stand alone - walk through please

Postby Umcorps » Fri Oct 17, 2014 8:37 am

I guess things might have moved on in terms of interface design, but there could be some pointers in this old post.

http://forum.intermorphic.com/viewtopic.php?f=14&t=1330#p5929

I don't have the current version of Reaper installed so can't check it myself right now.

Zhang
Bronze
Posts: 9
Joined: Sun Sep 21, 2014 12:30 pm
antispam_a: cole
antispam_b: 9

Re: Reaper 64 + Noatikl 64 stand alone - walk through please

Postby Zhang » Sat Oct 18, 2014 5:35 pm

[edit!! - Forgot to say that you need to go to the Audio and Midi setup in Reaper once its launched to enable the virtual midi port for input and output, otherwise it won't appear in the drop down list on Reaper's track page]

How do you do you do this? Thanks

Also MidiOX does not appear as an option in external Noatikl's output options.

Umcorps
Platinum
Posts: 415
Joined: Thu Aug 23, 2007 7:41 pm
antispam_a: cole
antispam_b: 9
Location: Directly above the centre of the earth
Contact:

Re: Reaper 64 + Noatikl 64 stand alone - walk through please

Postby Umcorps » Sun Oct 19, 2014 9:39 am

[edit!! - Forgot to say that you need to go to the Audio and Midi setup in Reaper once its launched to enable the virtual midi port for input and output, otherwise it won't appear in the drop down list on Reaper's track page]

How do you do you do this? Thanks


http://wiki.cockos.com/wiki/index.php/Preferences_MIDI_Devices

Also MidiOX does not appear as an option in external Noatikl's output options.


I'm not a Windows user so I can only guess at what might be going wrong there. However, last time I checked, MidiOx was a 32 bit programme and there were no plans to convert it to 64 bit. So it might be that neither Noatikl nor Reaper can "see" the interface because of this mismatch.

I'm not up to speed with alternative 64 bit options in Windows that might test this theory. I guess one option would be RTPMidi. That looks to me like it might be possible to use that to create a virtual midi interface that you could use as a loopback but you'd be on your own in terms of setting it up as I don't have an access to a 64bit Windows system.



[Edit] Seems like LoopBE could be another option for 64 bit.

Zhang
Bronze
Posts: 9
Joined: Sun Sep 21, 2014 12:30 pm
antispam_a: cole
antispam_b: 9

Re: Reaper 64 + Noatikl 64 stand alone - walk through please

Postby Zhang » Wed Oct 22, 2014 8:11 pm

After a lot of trial could not get this working external to Reaper.


Return to “Noatikl”

Who is online

Users browsing this forum: No registered users and 2 guests