Mix levels

Generative Music Composer
BillT
Posts: 4
Joined: Thu Jan 12, 2017 8:02 am
antispam_a: cole
antispam_b: 9

Mix levels

Postby BillT » Thu Jan 12, 2017 8:07 am

Hi! New to Noatikl.

Any way I can change the levels of the sounds easily in Noatikl? Can't find a mixer or any indication of levels!

imtim
Site Admin
Posts: 970
Joined: Thu Jul 24, 2003 9:53 pm
antispam_b: 2
Contact:

Re: Mix levels

Postby imtim » Thu Jan 12, 2017 4:10 pm

Hi

This is something that is not in Noatikl, sorry. :(

However, we know it would be useful so it is something we might look to try to do for Wotja at some point in the future.

Best wishes

tim

BillT
Posts: 4
Joined: Thu Jan 12, 2017 8:02 am
antispam_a: cole
antispam_b: 9

Re: Mix levels

Postby BillT » Fri Jan 13, 2017 8:45 am

OK, thanks for letting me know. Any way I can adjust volumes with velocity per channel?

imtim
Site Admin
Posts: 970
Joined: Thu Jul 24, 2003 9:53 pm
antispam_b: 2
Contact:

Re: Mix levels

Postby imtim » Fri Jan 13, 2017 10:23 am

Hi Bill

If you have a number of voices all feeding the same MIDI channel, then yes, you can use a Voice's velocity params to achieve that kind of mixing. Prob best to make sure the Velocity Range and Change Ranges are all zero :).

Hope that helps!

Umcorps
Platinum
Posts: 415
Joined: Thu Aug 23, 2007 7:41 pm
antispam_a: cole
antispam_b: 9
Location: Directly above the centre of the earth
Contact:

Re: Mix levels

Postby Umcorps » Fri Jan 13, 2017 1:38 pm

You can just put an amplifier unit in the FX slot for each voice and adjust levels on a per voice basis that way.

BillT
Posts: 4
Joined: Thu Jan 12, 2017 8:02 am
antispam_a: cole
antispam_b: 9

Re: Mix levels

Postby BillT » Sat Jan 14, 2017 6:30 am

Thanks all!


Return to “Noatikl”

Who is online

Users browsing this forum: No registered users and 1 guest